For more than 40 years SERF has provided engineering services and manufacturing of Mechanical Equipment and Skid Systems to
industries and the Federal government services.
SERF has on staff professional engineers and designers and we holds the following licenses and registrations, and authorization
from standard code governing authorities:
Experience
SERF, Inc. has more than 40 years of experience providing engineering and manufacturing of Process equipment such as
pressure vessels, reactors, heat exchangers, alloy piping systems, complete skids for installation. In addition we have engineered
and manufactured all types of conveying equipment for bulk products, silos and hopper feeders, and weigh stations. We have also
provided extreme lifting and handling equipment for products in excess of 1.1 million lbs.
Our many years of experience provides a basis for our Forensic Engineering of mechanical products to perform life studies and
failure analysis. We have the experience to determine: How the product failed, the design standards that apply, the manufacturing
standards required for its production, the inspection standards and the testing required to assure a quality product.
SERF provides a complete staff of skilled craftsmen certified to manufacture products to these worldwide codes and standards.
The following lists represent the many mechanical equipment, components and installations provided over our 42 years of service:
Authorized for the Manufacture of:
ASME “U” and “S” stamped pressure vessels and Pipe
Authorized for the Repair of Pressure Vessels
Natl. Bd. “R” stamp
Professional Engineering and Contractor
Registered
Florida
Registered General Contractor
Registered Mechanical Contractor
Company Qualifications and Equipment List
·
Computerized Conveyor System for
Containers handling Fiber in Large
Textile Plant
Activated Carbon Handling System for
Water Filtration Plant
Automatic Bulk Bag Loading and
Weighing Station
Pneumatic convey System that
Weighs, Feeds, and Inventories for
Selected Silo Systems
Large Robotic Positioning system for
welding of Heavy Components for
Missile launcher
Large Screw Conveyor for Explosive
Powders
Vacuum Pneumatic Loaders for
Material Conveying
Overhead Tote Bin Loading Station and
Conveying
Drag Conveyor for Coal and Ash
Handling System
1.1 million LB. (3) Crane Lift Fixture
35,000 Gallon (2) Wastewater Clarifiers
Activated Bin Bottom for Vertical Silo
Heat Exchanger Puller System
Unloader
Overhead 15,000 lb Hoist system
Gas Turbine Wheel’s Transport
Container, 6000 gal
Gas Turbine Wheel’s Transport
Container, 5000 gal
Lime Kiln Burner Rebuild 310 ss
Trough Belt Conveyor System for
Waste
Vibrating Screening System for
Separation
Screw Conveyor for Plastic Products
Large Heavy Transport Rail system for
Heat Exchanger
Distillation Column 100 ft engineered
Lift Plan, Multi-Crane (400 & 150 Ton)
Lift
Coal Fly AshConveyor Milti-Crane
Engineered, Lift Plan over canal (400 &
200 Ton)
Critical Engineered Lift Plan for 340 ft,
Reach for 600 Ton Crane
·
Air Expander Turbine Vane control
system
Two Jacketed 316 SS 6000 gallon
Reactor with agitators
Raioactive Waste Concentration
Systems
Waste Recovery Systems for Plating
and Textiles
High Temperature for Seawater
Conversion
Fuel In-flight Simulator for the F-15
Eagle
Brine Freeze System for Saltwater
Conversion
Molten Salt Bath Heating System
Agitation Cleaning Systems for Aircraft
Parts
Computer Controlled Pumping Systems
Citric Acid Hot Wash System for Ship
Cleaning
Containerized Vacuum and Pressure
Tank Systems
Power Boiler Venturi Scrubber Systems
Controls
Jet Blast System for Scrubber Deposits
Removal
Environmental Control Chamber for
Critical Machining
Fuel Haulers for Space Shuttle Support
Vehicles
High Temperature 316 ss Gas
Expander Housing
Compressor Housing Repair 52,000 lbs
Titanium Header piping for Nitric Acid
Storage
24” Bleach Line Titanium manufacture
and Install
Gas Turbine Heat Exchanger Repair
Manufacture Large Jacketed Flange for
Heater Shell
Decant Tank Repair and Modification
304 ss
Distillation Column 16” 304 ss Piping
Centrifuge Titanium Header System
Inconel 600 26” Gas Vent Line
Internal Demisting Section Installation
304 ss
Manway Installation for Reactor and N2
Blanket Vapor Control
ASME CODE PRESSURE
VESSEL DESIGNS AND PIPING
Authorization by ASME for “U” & “S” and
Natl. Bd. “R”
·
Inconel 800 Super Heater Bundle
Gas Turbine heat exchanger repair
and service Inconel 800 tubes
Duplex stainless steel 152,000 lb
evaporator field fabricated erected
on site
Inconel 600 Off Gas Duct assembly
prefabricated and installed on site
Manufacture a Thermal Screw Flight
Conveyor 30 ft long and 10,000 lb
and installed on site
Conversion of LTV Evaporator to a
plate type Lamella heat exchanger
surface for evaporator
Redesign of an LTV Re-Boiler for
higher temperature service
High Temperature and Pressure for
Power Boiler stress analysis and “S”
stamp
Titanium 24” bleach water line
fabrication and installation
16 TON Jacketed Lead Lined
Reactors for R-2 Chlorine
Hyperbaric Tanks for Man-rated
Diving Chambers
Rotary Multi-Tube Digesters
Converting Wood Chips
Nuclear Waste Resin Separation
Pressure Vessels for Primary Loop
Water in Submarine Service
Titanium Absorber for Chlorine
Dioxide Service
Refrigerated Reactor for Process
Development
High Temperature-Altitude Simulator
for Fuels R&D
Stainless Steel Jacketed Reactors
Titanium and Stainless Steel
Columns
Titanium Piping Systems
Repair and Replacement of Nozzles
and Heads
Inconel 800 Super Heater for Boiler
Power Plant Piping ASME “S” stamp
Rubber Lined 8000 gal Dxi Water
Softening Pressure Vessels
Vertical Product Liquor Flash Tank
316 SS
LTV Heater/Condenser Recovery
Retube
MATERIAL HANDLING
SYSTEMS and ENGINEERING
PROCESS EQUIPMENT